+34 932 896 785

C/Dolors Aleu, 19-21 2º 3ª
L'Hospitalet de Llobregat
08908 Barcelona

Protected Resistor 60X370 SI/PR/BP – 1000W

Spiral wirewound resistor composed by a ceramic tube with a high heat dissipation level and mechanical resistance used as support for the spiral resistive wire. Specially recommended
“GEARLESS” motor and for its “noiseless” characteristic.
Covering the tube and the extremities, we use a galvanised steel enclosure suitably perforated for correct ventilation. This protection is IP20. We can supply it with or without thermal sensor and with the customer’s ohm value specification.

Description

Temperature coefficient: 40 ppm. to 250 ppm.

Maximum load peak: 10XPn. 5 sec.

Maximum admissible voltage (in continuous): 

√Pn x R*

Low Noise

Operating voltage: 1000 v.a.c.

Standard protection: IP20

Resistor tolerance: +-5%

Inductance values are less than 20pH

Pn: Rated power / *R: Ohm value

W. ON FUNTION ON THE % FOR LOAD

Cycle time: maximum 120 seg.

Nominal Power: 1000W

DIMENSIONS(mm)

A B C H Weight (Kg)
400 430 80 136 2.2